• Shenyang Baoshan Woodworking Machinery

Home > News > Content
Nanjing Woodworking Engraving Equipment Quotation Runs Smoothly.
Apr 16, 2018

The Latest News: http://news.bjsyqw.com/shangye/49329962.html


Release date: 2018-04-15 00:15.820.

More than a decade, wacker carving machine in the whole of China and various countries and regions of the world running stable work, nanjing vick mann produced engraving machine production out of the countless products for people, to create the considerable economic benefits.

With stable performance, durability and high cost performance, it has been well received by domestic and international users, thus establishing a good brand of engraving machine.

2.jpg

Since 1995 nanjing vick, independent research and development of computer engraving machine, more than a decade, from October 1998 * a carving machine machine sold to nearly ten thousand sets of encouraging results today, wacker carving machine in the whole of China and various countries and regions of the world running stable work, nanjing vick mann produced engraving machine production out of the countless products for people, to create the considerable economic benefits.

With stable performance, durability and high cost performance, it has been well received by domestic and international users, thus establishing a good brand of engraving machine.


Notes for the handling of engraving knife of woodworking engraving machine:

1. When using the knife, clean the clamps and cap with gasoline or WD40 detergent.

2. Put the clamps into the pressure cap, otherwise the tool will not be installed easily. If the holder is not clamped in the pressure cap, the chuck will not be unloaded in the motor shaft.

3. Before installing the clip, pay attention to the matching between the clip head and the selected tool, otherwise the tool can not be tightened.

4. When the tool is clamped, the part of the tool sticking out of the grip should not be too long, otherwise it can easily produce vibration in the process, affecting the processing quality of the workpiece surface.

5. When changing the knife, make sure that the spindle speed is zero, that is, the cutting tool is allowed only when the spindle is stopped, otherwise serious personal injury accidents can occur.

6. If the press foot is used to sculpt, it is necessary to clean the dust on the foot and main shaft with a vacuum cleaner, and then install the cutter.

7. In the process of pressing the cap upward, make sure that the pressure cap is on the positive rotor thread, and the hand should be put in place without effort.

8. When removing the knife, remove the debris from the pressure cap and rotor shaft and then unload the knife.

3.jpg

There are many classification methods for wood carving machines, which can be divided according to different purposes and different needs:

1, according to the processing technology of woodworking engraving machine, including the type of processing methods, processing parts, geometry size and the processing precision, etc., can be divided for finish machining woodworking engraving machine and rough machining woodworking engraving machine.

2. According to the position of the relative cutting tool head in woodworking engraving machine, it can be divided into the pass and station type.

3. According to the process adaptability of the engraving machine, the woodworking engraving machine can be divided into general engraving machine, such as plane planing and gouging, etc.

4. The engraving machine can be divided into single shaft or multi-axis, single or multi-line, single head or long, and multi-tool engraving machine according to the number of working parts at the same time.

5. According to the processing nature of the engraving machine, the cutting mode or use division adopted by the woodworking engraving machine.

According to the degree of automation of engraving machine, wood carving machine can be divided into manual operation, mechanization, semi-automatic and automatic engraving machine.