• Shenyang Baoshan Woodworking Machinery

Home > News > Content
Strapping Machinery Maintenance
Oct 17, 2016

Strapping strapping machine parts must be checked before use a photocell is intact, reflector on and above the dust, if you do not put it in the right place, and remove the dust. Parts screw nut is loose, should be tightened in a timely manner. If there is a shortage of nail Cap phenomenon, must notify the repair crews are processed in a timely manner. See rail with no blockage, if there must be cleared, using compressed air to blow out sent rail in the dust.

Check that the crankshaft part is lack of oil, if you are short, the crankshaft must be dampened with drop method of refuelling, usually with a small stick dipped in oil, slowly drops on the shaft cannot be used in flow to the conveyer belt track, playing with time slipping, no belt, tighten belts. If you find any anomalies in the boot process, such as noise, vibration, odor, if you can't find, stop the automatic strapping machine repair person to work, so as to avoid damage to internal parts. In addition to providing a vacuum packaging machines and bundle the use and maintenance of the machine as well as shrinking machine.