The main advantage of hand-cranked straight edge banding machines is bonding fast, fast, lightweight, high efficiency, in order to achieve this effect, in addition to the purchase of a good Edge Banding Machines, but also pay attention to the edge band, hot melt adhesive, , Working environment and operating methods and other elements. Qingdao Ocean Seiko Machinery Factory below to tell you how to choose to high-quality manual song straight Edge Banding Machines.

Listen to the manufacturers of the product description, from the machine's specifications, performance, scope of use, methods of operation, price, service, etc., so that the required machine has a general sense of perception.

Two look, look at the body outside the intact situation. Check the parts, accessories are complete, see manufacturers demonstration personnel operation demonstration, see the bonding effect, master the operation of the machine essentials.

Three tests, open the machine for trial operation. Check the power supply, air supply line is smooth, sensitive, host spindle running is smooth, no noise and so on. On this basis, the user decided to buy or not.

Sometimes the automatic edge of the opportunity to appear induction power, because the automatic power supply side of the edge of the installation of the safety wire and leakage interrupter. And the chassis ground line device is reasonable and reasonable. In principle, has been discharged due to operational errors lead to leakage The possibility of accident, because the phenomenon of leakage of the machine will automatically power off the work, and the chassis ground wire normal use, so people do not have time to contact the current and the induction of electricity and leakage phenomenon is not the same, not with the line contact, So the breaker will not be judged as leakage phenomenon.

In order to prevent the automatic edge banding machines leakage phenomenon, to regularly check the precision cutting board saw, Edge Banding Machines and other electrical circuit problems, for the old line of corners of the cable line replacement, and effectively ensure the use of mechanical and electrical needs. For the power consumption of the season, pay attention to the lack of voltage to prevent and take effective measures to reduce the voltage caused by mechanical work.When the regional voltage stability, if the unit voltage instability should be considered to replace the cable, if Regional voltage instability is considered to be capacity and replace the cable at the same time.